Chevy SS Forum banner

Yay or Nay? Chevy SS Sedan on new Z28 Forged Wheels with Meaty Tires

  • Yay

    Votes: 24 63.2%
  • Nay

    Votes: 14 36.8%
1 - 10 of 10 Posts

·
Registered
Joined
·
397 Posts
Discussion Starter · #1 ·
Starting to love how wheels on the new 2014 Z28 camaro are looking and bet they would look amazing on our SS sedan's. These massive wheels wrapped in 305 wide tires will certainty beef up the SS. Now all we need is for someone photoshop guru to render it all together

2014 Camaro Z28 wheels


2014 Camaro Z28 pictures:



 

·
Premium Member
Joined
·
1,140 Posts
those brakes on the Z28 do make them look even better too and thankfully the SS comes with a brembo caliper and sporty brakes which will help a bit. what would these wheels cost? $2000/set new?
 

·
Registered
Joined
·
377 Posts
Not sure what the specs are on those

But my c5z06 rears i run square on the c5 have a ton of strut interference on the front of the ss.

Granted the vette was designed with leaf springs.



Edit. Checked the specs.

Front looks to be 19x11 et 11. Rear 19x11.5 et 32.

Strut clearance may actually be ok. Fender clearance on the otherhand will be rough up front. The rear of the ss has a huge lip thats rollable to help with things.
 

·
Registered
Joined
·
1,389 Posts
old thread never dies......

probably have to get replicas, or machine the centers down.

Everyone who puts those on a non z28 has some janky looking offset imo
 

·
Registered
Joined
·
1,382 Posts
No.
 

·
Registered
Joined
·
1,110 Posts
Just posting to see pics. Only way I can lol
Not sure what the specs are on those

But my c5z06 rears i run square on the c5 have a ton of strut interference on the front of the ss.

Granted the vette was designed with leaf springs.



Edit. Checked the specs.

Front looks to be 19x11 et 11. Rear 19x11.5 et 32.

Strut clearance may actually be ok. Fender clearance on the otherhand will be rough up front. The rear of the ss has a huge lip thats rollable to help with things.
old thread never dies......

probably have to get replicas, or machine the centers down.

Everyone who puts those on a non z28 has some janky looking offset imo

So I have these replica wheels ...made by Mrr ....specs are 20x10 in the front and 20x11 in the back......a few other ss and g8 owners have done this set up as well... There's a few pics on the forums of you search Mrr 228 ......I won't list what I paid for my set ...but for just the wheels you can get them for 1200-1500... Depending on where you look...be mindful that depending on where you go...they may be on back order as far out as three months
 
1 - 10 of 10 Posts
Top