[Maverick Man]

i looked under the fuse/relay box and i could not find which one was for the blinkers/turn signals. maybe i am blind or cannot read (which can be the case sometimes) but i don't see one. anyone know?

 

[jat63]

pull the cover off the side wall next to the drivers (LHD) left leg, more fuses and relays their

 

[fatboy]

what are you planning to do to the flasher relay?

 

[Boosted]

He probably installed LEDs in his turn signals and needs to change it out to a relay that won't cause hyperflashing.

 

[Maverick Man]

He probably installed LEDs in his turn signals and needs to change it out to a relay that won't cause hyperflashing.

correct

resistors are not an option, i hate using them. an electronic flasher is the way to go. besides you can't really wire up a resistor easily on the way these bulbs mount.

i looked at all three areas the side dash, under the hood and rear fuse compartment and even the manual. i don't see any relay for the "turn signals" the closest thing i found was something called "driving lamps". but even then the diagram or actual box showed no "relay" for one. any thoughts?

 

[chinamonty]

It may not have a separate relay for the flasher or even a flasher can. The flasher is probably just a chip on the circuit board in the instrument cluster - that is how are Falcons are so I wouldn't be surprised. I will make a call and find out tomorrow if I get a chance..

 

[radrace19]

BCM controls most things so I bet the BCM has the flasher relay built in.
I'll check

Edit:
Yes the BCM holds the relay for the turn signals

 

[Maverick Man]

It may not have a separate relay for the flasher or even a flasher can. The flasher is probably just a chip on the circuit board in the instrument cluster - that is how are Falcons are so I wouldn't be surprised. I will make a call and find out tomorrow if I get a chance..

BCM controls most things so I bet the BCM has the flasher relay built in.
I'll check

Edit:
Yes the BCM holds the relay for the turn signals

thanks guys. well that idea is gone. the way these bulbs connect also also prevents you from easily putting in a resistor in as well. oh well.

 

[GTPprix]

thanks guys. well that idea is gone. the way these bulbs connect also also prevents you from easily putting in a resistor in as well. oh well.

If only someone or there knew how to custom program the bcm....

 

[Boosted]

If only someone or there knew how to custom program the bcm....

You should fly out to Florida and program my car. I don't want to pull out the cluster, HUD, radio, etc from it and ship them out.

I'd really like to see what you are capable of doing with the SS though, I've seen your work on the Caprice and other new GM vehicles and it is amazing. I just wish it didn't involve removing so many pieces from the car to be shipped out.

 

[radrace19]

What I want to know is what does Chris have up his sleeve for the SS BCM since it uses the same one as the C7
-Greg

 

[Maverick Man]

If only someone or there knew how to custom program the bcm....

and only if there would be someone whom actually replied back to emails.

 

[GTPprix]

and only if there would be someone whom actually replied back to emails.

Emails have to be sent to get a reply lol seriously though haven't seen anything from you?


Greg it's the same global a BCM in nearly everything right now the one I do the window up down on.


Sent from AutoGuide.com App