Chevy SS Forum banner

1 - 2 of 2 Posts

·
Premium Member
Joined
·
2,997 Posts
Discussion Starter #1
First off sorry for this but I spent 35 minutes reading old posts and didn't get a clear answer so here goes....

My end links are not yet rattling but thinking about buying new set F+R to head off the inevitable rattle down the road. When I look at Whiteline, Superpro, etc their rear end links have a spherical mount on each end where the OE is a sphere on top at the sway bar end and a through bushing on the bottom where it attaches to a U bracket on the suspension arm.

For those that upgraded from the OE end links on the rear, how did you mount the spherical joint to the U shaped mount from the OE link ?

Does the stud on the spherical joint go all the way through from one side or does it just mount to one of the ears on the U bracket ?

283069
SS-rear-SB.jpg
 

·
Premium Member
Joined
·
2,190 Posts
283072
Looks

See #5, GM parts list screwy on this one. I found out the hard way that description
is in error. MY14 looks like 5, 15-17 looks like 6. Both ends of link are ball joints.
 
1 - 2 of 2 Posts
Top