Chevy SS Forum banner

Lift point information

34K views 31 replies 14 participants last post by  2074 
Some actual photos would be more helpful.
I got mine on my 2 post lift for the first time. The the service manual pics Navy Lifer posted seem to indicate the proper 2 post lift points are on the unibody inboard of each pinch weld lift point. I couldn't get my lift pads to rest on those points without the lift arm pressing against the rocker panels. With my shortest lift pad extensions, I could not get the pads under the lift points (which are about 3/4" lower than the pinch points. I had to use the pinch weld lift points. Not ideal but I'd bet lots of lifts run into this issue. Maybe next time I'll get 4 pinch weld jack adapters... if they fit properly in my lift arms.
 

Attachments

Some actual photos would be more helpful.
While I had to use the pinch welds this time, I did get pictures of the proper lift points.

(yeah I could have used the proper rear point but couldn't use the front and I wanted to lift it level)
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top