[2014Holden]

Before

After

....one day in the rain...

 

[good2go]

Yikes, is that condensation inside the lens? . . . and that's after just one day in the rain !! 😬

 

[SS WOT]

Looks good. I would double check the seal in back. Hope you find reason for moisture there.

 

[SSSteve176M]

Congrats on the tail-lights, I think it add a bit of uniqueness to the machine. I have not had mine out in the rain yet so I will pay close attention. I know I really leaned into them when I snugged them up. I think there are a few others with the Spyder's, wonder if they have had any issues.

 

[MIEngineer]

Mine work. But per my other posts I had to tweak the housings because their quality / gap is poor from left to right

Definitely a better option than dropping insane amounts of money for HSV parts. Especially if it ever gets hit...

 

[LS3 VER33]

One of mine leak, but it was not directly the taillights fault. Bolts were evidently overtightened and cracked around the threads by previous owner. I fixed it up with some glue and slathered the area with silicone. It's held up for over a year now.

 

[brokenj]

Scary! Hopefully you get to the bottom of it.

 

[bourmb]

Mine work. But per my other posts I had to tweak the housings because their quality / gap is poor from left to right

Definitely a better option than dropping insane amounts of money for HSV parts. Especially if it ever gets hit...

Can you elaborate? I’m on the fence for buying these.


Sent from my iPhone using Tapatalk