I had a forum member send me their old one (they upgraded to the GM one with the integrated lever on the wheel). I disassembled, drew the part in CAD and printed in chopped carbon fiber.
This may not the be the form for this, so I figured I'd post and the moderators could help find the right place. This is the link to the file:
Takes a few minutes to pop the switch apart, just use a small thin flat blade screwdriver. Then pop the wheel apart, take out the little light up window that says SRC and pop this part in.
Hope this helps someone else. I had some time and was interested in trying to draw it.
This may not the be the form for this, so I figured I'd post and the moderators could help find the right place. This is the link to the file:
Takes a few minutes to pop the switch apart, just use a small thin flat blade screwdriver. Then pop the wheel apart, take out the little light up window that says SRC and pop this part in.
Hope this helps someone else. I had some time and was interested in trying to draw it.
Attachments
-
1.5 MB Views: 3
-
1.9 MB Views: 5