Chevy SS Forum banner

How to Bed-in Your Brakes

1805 Views 2 Replies 2 Participants Last post by  Diehard
1 - 2 of 3 Posts
I recently read an in depth article on brake pad lining composition and the bedding in process you cite is only for certain lining compositions.

There are a multitude of pad break in procedures depending on the type and composition of lining materials. Using the wrong one for the material can be very bad.

I am almost certain GM is now using the low/no copper linings now earlier than required by law.

I'll have to put in a question to a friend in Warren to see if I can get a composition to determine the correct break in procedure for our cars.
That would be interesting to find out GM's standards and their recommended break-in.
Ceramic seems to be getting to be a popular OEM by some.
1 - 2 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.