Fitting Instructions for Molded Mudflaps

CB750 said:

I'll get pics later its getting dark but I noticed immediately that the right side when standing behind the car and eyeballing the flap on the tire tread sticks out further to the right than the left sticks out to the left.

Anybody else have or catch this?

Click to expand...

I just installed these a few days ago and did not notice that. See if you can get those pictures posted so I can verify for you against my car.

I usually hate mud flaps, these arent half bad. I may have to grab a set.

From my experience with these same mudflaps on the G8, you might want to relieve the top of the front mudflaps right where it wraps around the inner edge of the fender - they will leave a mark or paint rub spot after being left on several years...

Of course, they will prevent a lot more marks than they leave behind...

Do they come off easy? I'm thinking of getting some for the Winter, then taking them off in the Summer.....

They could easily be removed, just don't use the 3M tape. The fronts do need 1 hole on each side drilled into the bottom of the side skirt. I would simply put the fastener back into the hole to cover it when the flaps are off.

I realize this is an old discussion, so I am not even sure if it will be read.

I tried to email the person who had the Mud Flags three years ago and the mail message bounced back as undeliverable. Does anyone have updated info on Mud Flaps / Guards for my 2015 SS?

Thanks

Donnie

They are an official accessory for the SS, so you can buy through any chevy dealer or over the internet. They are called "splash guards". front part number: 92277968, rear: 92267788. About $60 a set.

https://holdenpartsusa.com/products/14-17-chevy-ss-holden-logo-mud-flaps

no tax free ship.