[evilss]

does anyone make exhaust for this car yet called a bunch of places some said that there not going to make it and others said 4 months

 

[Headrat]

does anyone make exhaust for this car yet called a bunch of places some said that there not going to make it and others said 4 months

Please check out the posts from "Stainless Works" on this forum. It's a coming!!!

 

[firehawk238]

does anyone make exhaust for this car yet called a bunch of places some said that there not going to make it and others said 4 months

To answer your question, no. Currently no one makes exhaust but over the next 3 to 6 months there will be some available.

 

[GXPaycheck]

Hopefully Solo will make one soon. Corsa is also working on it.

 

[Jstue]

Hopefully Solo will make one soon. Corsa is also working on it.

Till then, I'm just going to run open header's.

P.S. Your neighbors hate you.

 

[1badss]

All..I've doing some research and found the following exhaust company direct from AU where our SS is made..I got the following info direct from X-Force tech/sales dept from AU..You will be able to purchase thru USA Dealer and/or direct from X-Force in AU...They also have headers too for those that want them...

XForce. Performance Mufflers, Exhaust Systems & Accessories. Home

"Yes, our exhaust systems for Holden VF Commodore will fit and work on Chevy SS. If you don't want something that is too loud we would suggest to go with the 2.5" cat-back exhaust with the Varex mufflers"...

For more information about the VAREX Mufflers, please visit our website on XForce. Performance Mufflers, Exhaust Systems & Accessories. About the Varex™ remote controlled Sports muffler.

You can either buy from our dealer in Minnesota or directly from us.

Our dealer contact details is as follow:

Modern Automotive Performance
9800 Hemingway Ave S
Cottage Grove MN 55016
USA
651-348-8811
([email protected])

 

[Commodoreman2000]

Here's a vid fitted to VE

 

[[email protected]]

I know we will be working on getting an exhaust released for the SS once we get ours in for development. Hopefully the weather lets up today so we can begin work on our complete family of upgrades for this.

 

[firehawk238]

I know we will be working on getting an exhaust released for the SS once we get ours in for development. Hopefully the weather lets up today so we can begin work on our complete family of upgrades for this.

So you have your SS already? Gonna be looking for that photo/ baseline dyno thread....

 

[GXPaycheck]

I know we will be working on getting an exhaust released for the SS once we get ours in for development. Hopefully the weather lets up today so we can begin work on our complete family of upgrades for this.

Andy, how about running it over to Solo for a day. They need a hot model!

 

[[email protected]]

Andy, how about running it over to Solo for a day. They need a hot model!

Unfortunately I know this will not be in the plans for our car, we already have an exhaust package, and are working with our supplier now for this.

 

[G8 GT V8]

Unfortunately I know this will not be in the plans for our car, we already have an exhaust package, and are working with our supplier now for this.

You guys sticking with Corsa?

 

[firehawk238]

You guys sticking with Corsa?

Personally I have never been much of a fan of Corsa. Not really saying anything negative about their product, just very expensive and too tame for the money. If I were going to spend that kind of denero I would rather throw at a company like B&B. Their stuff sounds amazing. I am really excited to see what Stainless Works does for us in the upcoming few months. I was thinking about a catback on the SS but really think some long tubes with high flow cats and maybe a muffler delete axle back with a 5" slash cut, beveled, double wall tip would look and sound amazing!

 

[[email protected]]

Personally I have never been much of a fan of Corsa. Not really saying anything negative about their product, just very expensive and too tame for the money. If I were going to spend that kind of denero I would rather throw at a company like B&B. Their stuff sounds amazing. I am really excited to see what Stainless Works does for us in the upcoming few months. I was thinking about a catback on the SS but really think some long tubes with high flow cats and maybe a muffler delete axle back with a 5" slash cut, beveled, double wall tip would look and sound amazing!

Did you hear videos of our gxp with it? Tame is the last word I would use to describe it. At wot it was amazing, yet at idle and light throttle just enough to know it wasn't stock. I've always considered their exhaust as the original "dual mode" system.

Our goals are always about having a refined product, and using the highest quality made in the USA products available. We also want to offer something that fit, finish, and consistency are key features of the exhaust.

 

[[email protected]]

Here are some examples: And sorry about the music, I know it's pretty lame.

https://www.youtube.com/watch?v=vOpL8olv17w

https://www.youtube.com/watch?v=MzWDkH-b7UY

https://www.youtube.com/watch?v=3uRLb7BPqQI

https://www.youtube.com/watch?v=Uwzpmt1G528

 

[G8 GT V8]

Did you hear videos of our gxp with it? Tame is the last word I would use to describe it. At wot it was amazing, yet at idle and light throttle just enough to know it wasn't stock. I've always considered their exhaust as the original "dual mode" system.

Our goals are always about having a refined product, and using the highest quality made in the USA products available. We also want to offer something that fit, finish, and consistency are key features of the exhaust.

I agree. My friend's G8 with headers, high flow cats, and corsa sounds amazing and is far from tame. Compared to open headers, it might be tame, but compared to all other G8 systems it sounds about the best. I agree that their systems are not a low cost option but the solo axle backs aren't exactly cheap either.

 

[evilss]

Well Borla just make me an axle back I'm surprised on home much the stock mufflers hold back at idle they sound the same but when rev it up its louder

 

[firehawk238]

Did you hear videos of our gxp with it? Tame is the last word I would use to describe it. At wot it was amazing, yet at idle and light throttle just enough to know it wasn't stock. I've always considered their exhaust as the original "dual mode" system.

Our goals are always about having a refined product, and using the highest quality made in the USA products available. We also want to offer something that fit, finish, and consistency are key features of the exhaust.

Like I said, dont want to bash them. Also my experience in most products has primarily been in the Fbody world. On that note the few cars I was around that had their exhaust were very mild bolt on only cars that didnt have head/cam or even headers. A good set of long tubes can make almost any exhaust sound mean under WOT. I am positive the SS would sound nasty with headers and off road connection pipes. Just my opinion though.

 

[G8 GT V8]

A good set of long tubes can make almost any exhaust sound mean under WOT. I am positive the SS would sound nasty with headers and off road connection pipes. Just my opinion though.

Very true

 

[grantisaac]

Hey you guys are lucky in the the States. You have a far better sounding system than here in Australia. I put a custom twin 3 inch catback on my ssv redline but it drones a little.