Exhaust pics

12160 Views 36 Replies 17 Participants Last post by Rottster, Feb 7, 2014

GXPaycheck

Discussion Starter · Nov 25, 2013

Here's one of the axle back portion just forward off the muffler. No flange connection like the G8. Have to pull the clamp to verify, but it looks like a slide in connection.

See less See more

Save

1 - 5 of 37 Posts

Would the NPP mufflers off a Camaro fit this car? I have this on my z06 and love being able to make it loud or quiet. In loud mod the butterflys open and you can see straight thru the muffler to the exhaust pipe.
z51vett
Doug

Save

z51vett

· #13 · Nov 26, 2013

Yeah I need to see the setup on the Camaro or a parts diagram.
z51vett
Doug

Save

z51vett

· #19 · Nov 26, 2013

CB750 said:
But the Npp mufflers are part of the pipe and not available separately so...

muffler & pipe 6.2 LITER W/O SUPERCHARGER, W/HIGH OUTPUT, W/PERFORMANCE EXHAUST

MSRP Online Price
$1,959.97 $1,223.02

Nope the mild to wild wouldn't work on a conversion because the control setup for the flappers isn't there.

If the mufflers do fit you would need to rig up a physical manual control for them...the NPP uses the computer, throttle position, vacuum and electrics to decide and control when they open and close.

Also I would not mess with the factory axle pipe ball/flange. I would make an adapter that if it could fit connect the Npp mufflers after you cut them off the pipes to the factory axle pipe connection.

Heck if you need more loud and got alot of money just put them on if they fit and leave them open unmuffled which is the flapper valve's default!

Then when you get stopped for disturbing the peace tell the officer to observe the GM factory mufflers on it!

Is that for both sides that looks like it goes all the way to cats.
Oh sunset orange creations makes a mild to wild control box. So does the company the makers of the mild to wild switch Naked parts I think. Box vaccum lines and electronic controller.
Z51vett
Doug

Save

z51vett

· #20 · Nov 26, 2013

Would like to see it on actual Camaro can cut over axle pipe and weld in muffler.
Thanks CB750
z51vett
Doug

Save

z51vett

· #27 · Dec 30, 2013

Sunset orange creations makes a stand alone system for non npp cars. All you need is a power supply vacuum source for the unit it controls the solenoid for opening and closing the baffles remotely. Are Camaros diff are they not vacuum operated.
Just curious wanting to under stand how they work on Camaro. Vettes that never had NPP that is 06's can be converted. All you are doing is cut power to solenoid off and on. Which the unit does while providing vacuum in other words it has a solenoid built into the unit just run vacuum and power.
z51vett
Doug

Save

1 - 5 of 37 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month